Home Downloads FAQ
 
 


 

EFFICIENCY RATINGS

puraDYN removes harmful contaminants at the following rates:

Solid Contaminants:
100%

Water:
96.18%

Fuel:
77.60%

Did you know?

puraDYN® bypass oil filtration systems have proven to be 100% efficient at removing solid contaminants down to below
1 micron from oil.

•••

Solid particles in the
5 to 15 micron range cause the most engine wear. Luckily, puraDYN® systems filter down to below 1 micron.

•••

New engines dump more contaminant’s into the oil to reduce exhaust emissions.

•••

puraDYN® systems are highly efficient at removing both water and fuel from oil.

 

 

 

  
 
 

Oil analysis is the key to evaluating the benefits that result from optimized oil life and extended oil drain intervals. In addition, oil analysis is the only economical way to measure wear or contamination in the engine or equipment.

Puradyn's Oil Management Program includes an oil-analysis schedule that helps maximize the system's potential. The oil analysis is conducted by an independent laboratory and is reported in a three-tier test that includes:

• Spectrographic metals
• Wear metals
• Contaminant metals

These metals must be monitored to fully evaluate the lubrication system. For complete information on this process, please refer to our Installation Manual.

 

 

 

 

Site Map

Page last updated:  05/04/08


CTC Analytical